DF10-10 Hyper press 500ton hydraulic compress earth brick making machine is our hot sell , there is very strong machine frames. it is very suitable for making clay bricks, soil bricks, interlocking bricks, lego bricks.
1. can produce10-10 can make 10pcs bricks(Size :300x150x100mm) per mould, it can make more than 30000pcs in 8hours, so the production capacity is very high, suitable for the customers who want a big capacity.
2. DF10-10 Brick making machine is an automatic hydraulic brick machine which is controlled by PLC, so the machine can be easily operated by only one person.
3. DF10-10 brick making machine uses a electric motor to drag the CBT-E400 gear pump, double oil cylinders, the hydraulic pressure can reach 35Mpa,which can can ensure the brick density very high and brick quality very strong.
4. Mould can be changed according to cusmer's requirements.
5. High productivity.30000 bricks per 8hours.
The basic process of a clay brick production line typically uses clay as the main raw material, producing finished bricks through a series of technological steps. Based on relevant information, the following is a typical clay brick production process:
1. Raw Material Preparation: The main raw material is clay.
2. Crushing: Crush the clay into fine particles of 1-2mm using a crusher.
3. Sieving: Sieve out particles slightly larger than 2mm.
4. Mixing: Mix clay, cement and waterUse a mixer to mix for at least 15 minutes to ensure no lumps or dry material remain. The order of adding materials is important; add coarse materials first, followed by fine powder and water.
5. Forming: Press or extrude the clay into brick blanks.
6. Drying: Dry the brick blanks to remove excess moisture and prevent cracking during firing.
Process: Natural drying or artificial drying; the time depends on weather and equipment, typically taking several days to a week. After drying, the brick blanks become stronger, making them easier to transport.
7. Packaging (Cooling, Inspection, and Packaging)
